1200 AMP UL1640 PORTABLE WELDING STATION-480-208Y: I-LINE 8 X 100A 480V WELDING OUTLETS – 10 X 60a, 208Y/120V DOWN LINE RECEPTACLES – 10 X 20a, 120v GFCI DUPLEX RECEPTACLES.
1200 AMP UL1640 PORTABLE WELDING STATION-480-208Y: SCOPE OF DEGINE: All Bossltg Welding Temp Power systems are assembled per UL1640 Standards. This 1200a WELDING STATION is 480v fused protected and performs as MAIN SYSTEM ON/OFF SWITCH. 480v Line side feeds 8 X 100A, 480V breaker protected pin & sleeve welding receptacles. A 150kva, 480v-3ph to 208y/120v-3ph transformer rated for out door use delivers power to a 600a, 208y/120v, 3ph, 4p/5w panel board installed in a Nema 4 enclosure. Panel board has 10 x 60a, 208y/120v 3p breakers to protect 10 x 60a 208y/120v pin & sleeve receptacles. These receptacles supply power to 10 x GF6-120V down line GFCI boxes. Panel also has 10 – 20, 120v 1p breakers that protect 10 x 20a, 120v duplex GFCI receptacles with IN-USE covers. Several Green ON/OFF indicator lights throughout the system to alert operators of power. This package is mounted within a metal cage frame single point lifting eyes and forklift pockets. Total system is UL performance tested, electrical, static load and environmental weather test simulated. This Bossltg product will carry a NEMA 3R Environmental Rating. After testing, system is UL Labelled, palletized, metal strapped, then plastic wrapped for shipments.
SQUARE D – I LINE SWITCH GEAR – BREAKERS
NOTIFICATION OF DESIGN VARIATIONS: Bossltg supplies WELDING PANELS with amp rating up to 1200 amp. As many welding receptacles per clients request.
SPECIFICATIONS: 1200a PORTABLE 480V VOLT WELDING PANEL – 8 X 100A, 3p breakers with 8 x 100a, 480v PIN & SLEEVE receptacles. Includes 10 x 20a, 120v GFCI duplex receptacles with IN-USE COVERS and 10 x 60a 208y/120v, 3ph 3p breakers to protect 10 x 60a, 208y/120v pin & sleeve receptacles that power multiple GF6-120V down line GFCI boxes.
NOTE: Boss can special assembler I-LINE welding panels to clients request and UL1640 Certify, UL Serialize for OSHA regulator monitoring. UL1640 Safety acceptable in USA and in Canada.
30amp, 60amp, 100amp and 200amp PIN & SLEEVE receptacles are available in all welding operating voltages.
SKID TYPE: 2″ Metal square tubing designed cage with forklift pockets and lifting eye with 4/0 grounding lug.
480V PIN/SLEEVE RECEPTACLES: Killark, Appleton, Hubbell or Crouse Brand, 60a, 3p/4w, 480 volt
PANEL BOARD: 1200a, MAIN BREAKER, 480V, 3ph, 3p/4w. 48 Circuits with 10 – 60a, 3p branch 480V breakers and 10 X 20a, 120v 1p, breakers.
WIRING: All wire will be sized to 115% of amp load rating. THHN 90* wire type within system.
UL CERTIFICATION: Boss will assemble and test this product to UL1640 Portable Job-site Electrical Distribution Standards.
UL LISTED MARK: The UL Mark will be labelled to the 1200 AMP UL1640 PORTABLE WELDING STATION-480-208Y. This mark will have a serialized number so that OHSA can track this product through the UL Certification system.
FALSE UL REPRESENTATION: Just because an electrical assembler uses all UL Certified Electrical Components does not represent a product to be UL Listed. The company that is assembling the product has to be UL Qualified by Underwriter’s Lab and confirmed with a UL File Listing. A UL Listed Printed Decal distributed by UL’s Authorized Printer that will show a recorded individual serialized tracking number with UL Assemblers Company name. This UL Label must be installed in open view of operator on product..
Bossltg is registered as UL Certified Temporary Job-site Electrical Distribution UL1640 Assembler. Confirmation can be validated by going to www.ul.com. Go to the UL File Directory, type in BOSSLTG, INC. All Bossltg filings will be displayed.