Description
400 AMP PORTABLE SPLITTER PANEL 480V 4 X 100 AMPS: Cart or Skid
400 AMP PORTABLE SPLITTER PANEL 480V 4 X 100 AMPS . SCOPE OF DEGINE: All Bossltg Temp Power CART systems are assembled per UL1640 Standards. This load center is installed in a Nema 3R enclosure. Green ON/OFF indicator light to alert operators of power. 4 – 100A, 480v PIN/SLEEVER receptacles wired into a separate Nema 4 Enclosure wired to load center.. This package in mounted to a metal rubber wheel cart frame that can be rolled by hand over solid surfaces. Unit has center point lifting eye. Total system is UL performance tested, electrical, static load and environmental weather test simulated. This Bossltg product will carry a NEMA 3R Environmental Rating. After testing, system is UL Labelled, palletized, metal strapped, then plastic wrapped for shipments.
NOTIFICATION OF DESIGN VARIATIONS: Bossltg supplies SPLITTER PANELS with amp rating of 1200a and below. Voltages 480v and 208v.
SPECIFICATIONS: 400 AMP PORTABLE SPLITTER PANEL 480V 4 X 100 AMPS: 400a load center with 4 x 100a, 3p, 480v breakers. Mounted 4 x 100a, 480v PIN & SLEEVE receptacles.
TYPE: 2″ Metal square tubing designed cart with 2 large rubber conductive type wheels. CART design with a center point lifting eye and 4/0 grounding lug.
480V PIN/SLEEVE RECEPTACLES: Killark, Appleton, Hubbell or Crouse Brand, 100a, 3p/4w, 480 volt
LOAD CENTER: 400a, MLO, 480V, 3ph, 3p/4w. 24 Circuits with 4 – 100a, 3p branch 480V breakers.
WIRING: All wire will be sized to 115% of amp load rating. THHN 90* wire type within system.
UL CERTIFICATION: Boss will assemble and text his product to UL1640 Portable Job-site Electrical Distribution Standards.
UL LISTED MARK: The UL Mark will be labelled to the 400 AMP PORTABLE SPLITTER PANEL 480V 4 X 100 AMPS. This mark will have a serialized number so that OHSA can track this product through the UL Certification system.
FALSE-HOOD REPRESENTATION: Just because an electrical assembler uses all UL Certified Electrical Components does not represent a product to be UL Listed. The company that is assembling the product has to be UL Qualified by Underwriter’s Lab and confirmed with a UL File Listing. A UL Listed Printed Decal distributed by UL’s Authorized Printer that will show a recorded individual serialized tracking number with UL Assemblers Company name. This UL Label must be installed in open view of operator.
Bossltg is registered as UL Certified Temporary Job-site Electrical Distribution UL1640 Assembler. Confirmation can be validated by going to www.ul.com. Go to the UL File Directory, type in BOSSLTG, INC. All Bossltg filings will be displayed.
